1988a1 Manual

About ValtroHandgunsShotgunsDealersPartsLinksSitemapManualsContact UsSite Designed by MemorablePlaces.com

Disassembly (Field Stripping)

This product should be cleaned after every use and when exposed to dirt, sand, etc. When not in use, clean at least twice per year.

Click on photos for larger images.

With the pistol unloaded,

the magazine removed and the hammer down, depress the recoil spring plug, with the supplied wrench,

and turn the barrel bushing clockwise, towards the right side of the pistol until the recoil spring plug and recoil spring are free.

Be careful, the recoil spring and plug are under tension and can fly out with substantial force.

Next Page

Always run a dry patch through the bore, prior to shooting to remove excess oil or grease.

Lead warning

Discharging firearms in poorly ventilated areas, cleaning firearms, or handling ammunition may result in exposure to lead and other chemical known to cause birth defects, reproductive harm, cancer, and other serious physical injury. Ensure adequate ventilation at all times. Wash hands thoroughly after exposure.

Spare Parts

Use only genuine Valtro spare parts. Use of inferior after market parts can create unsafe conditions. Use of other after market parts voids all guaranties and warranties. Modifications and alterations of the pistol or its parts voids all guarantees and warranties.

 

 

 

© Copyright 2001, 2002, Valtro USA and MemorablePlaces.com
This page was last updated by Memorable Places Consulting on: July 17, 2002
All Rights Reserved

[About Valtro] [Handguns] [Shotguns] [Parts] [Links] [Sitemap] [Manuals] [Contact Us]